Siemens DTU3005-B Betreibershandbuch PDF herunterladen (Seite 28)

4 Creating Project Files — Profibus to Devices

24 Siemens Energy & Automation, Inc.

8. Select a Word Number from 2 to 15. A menu of

choices is displayed (see Figure 4.16).

Note: Selecting a word number allows you to

select which real-time data item will be

written to that particular word.

Appendix C lists the available data items

for each device.

Figure 4.16 Customized Real-Time Data Menu

9. Select a data item from the list. Not all available

items are shown at one time. To view all the

choices, use the Up and Down Arrow keys, the

Page Up and Page Down keys, or use the

mouse to click the arrows on the scroll bar on

the right side of the list. Press Enter to make

the selection.

10. Repeat steps 7 and 8 for each Word Number

you want to configure. You may return to the

default data items by selecting the Set Defaults

button. You can change any word number you

want to be different from the default. Or, you

may clear the entire list by selecting the Clear

All button.

11. When you are finished configuring all of the

word numbers, select Save to save your

choices, and then select OK. If you wish to can-

cel all of the changes you have made, select

Cancel.

To remove a device from the device list, select

Delete. Selecting Pack will minimize the size of the

command register block, removing registers for

deleted devices.

Once you have entered the device information for all

the devices attached to Port 2, Select Save to save

the device information to the project file, and then

select OK or press Esc to exit the device list config-

uration screen.

If at any time you want to return to the last saved

version of the device list, select Revert.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 119 120

Keine Kommentare

Siemens DTU3005-B Betreibershandbuch Seite 28