Siemens DTU3005-B Betreibershandbuch PDF herunterladen (Seite 40)

6 Setting Options

36 Siemens Energy & Automation, Inc.

6.2 Selecting the COM Port

Before downloading or uploading a project file to the

DTU3005P unit, you must configure the DTU3005P

Editor program to use the correct communications

port. The program sets COM 1 as the default port. If

your mouse, modem, or other device is connected

to COM 1, you must change this setting.

To change the communications port, select Set

COM Port from the Options menu. The Set Com-

munications Port screen is displayed (see

Figure 6.4).

To select the communications port, use the Left and

Right Arrow keys to select either COM 1 or COM

2. With the desired communications port selected,

press the Spacebar to confirm your selection. The

dot at the cursor indicates which COM port is

selected. Select Save to confirm your selection,

then select Ok to exit the screen. Select Revert to

return to the previously saved selection.

Figure 6.4 Set Communication Port Screen

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 119 120

Keine Kommentare

Siemens DTU3005-B Betreibershandbuch Seite 40