Siemens ET 7Y Series Spezifikationen PDF herunterladen (Seite 39)

Getting Started

2-13

ET 200S IM 151-7 CPU Interface Module

A5E00058783-04

Configure the S7-300-CPU as follows:

Se-

quence

Action Result

1 In the SIMATIC Manager, select the project

Getting Started in the left-hand part of the

window.

2 Insert the new S7-300 station into the project as

described in step 4, point 3.

3 In the SIMATIC Manager, click on the S7-300(1)

station in the left-hand part of the window.

The Hardware symbol appears in the

right-hand part of the window.

4 Double-click on the Hardware symbol in the

right-hand part of the window.

The Editor used to edit the hardware

opens.

5 If no catalog is shown in the right-hand part of the

window, activate it by selecting the command

Catalog in the View menu.

In the catalog, navigate through SIMATIC 300 to

Rack 300.

Drag and drop a mounting rail into the top

left-hand window.

6 Insert the PS whose order number matches the

order number of your PS, at slot 1 as described

Configuration example (may differ from

your configuration):

in step 4. Repeat for the S7-300-CPU (slot 2), the

S7-300-DI (slot 4) and the S7-300-DO (slot 5).

Note:

 A window appears when the S7-300-CPU is

inserted. In this window, select ”PROFIBUS

Network” and set the address to 2.

Confirm with OK.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 213 214

Keine Kommentare

Siemens ET 7Y Series Spezifikationen Seite 39