Siemens NRN 67 Series Spezifikationen PDF herunterladen (Seite 34)

RSSB Page 34 of 87

GSM-R user procedures (cab radio Version 2)

 In signal assisted call routing areas there is normally only one train describer berth

associated with each signal section and it will always contain the TRN of the first train

scheduled to depart. Therefore if you are the driver of the second train and you

attempt to register the cab radio before the first train has departed, you will block the

first train’s registration.

In signal assisted call routing areas you must only register the radio at a main aspect

signal and not at a position light signal unless the sectional appendix says that you can or

an alias plate is provided.

6.2.3 Registering with the driver’s key on

The simplest way to register is by pressing on the cab radio, while your driver’s key is

inserted.

 You must not register a train whilst it is moving, as registration is likely to fail. This

can only be achieved by the pre-registration process as shown in 6.2.4.

GSM-R GB

Registration code

GSM-R GB

Registration code

1A45 159

GSM-R GB

Registering

1A45 159 Lead Driver

GSM-R GB

Wait/check head code

1A45 159

Press .

You will be asked for the

registration code which is the

TRN followed by the

location code.

Enter the information using the keypad.

Press to send the registration code to the

GSM-R network.

Once the GSM-R network has received the

registration code, it will be displayed in the top

right-hand corner of the display and you will be

asked to wait for the train reporting number.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 86 87

Keine Kommentare

Siemens NRN 67 Series Spezifikationen Seite 34