Siemens NRN 67 Series Spezifikationen PDF herunterladen (Seite 53)

RSSB Page 53 of 87

GSM-R user procedures (cab radio Version 2)

Option 2 – uses the “Multiparty call” function in the menu.

The following text shows you how to set up driver to driver communication using both

options.

Note: Driver to Driver communications is the only procedure which requires an eight digit

registration code

You and the other driver involved will need the following information:

 Five digit code for the combined train formation.

 This can either be obtained by selecting “Show

Registered” in the Reg/Dereg menu or by contacting

the signaller responsible for controlling the area.

 Location code, this must be a 99X code.

Before registering the cab radios, you must come to

a clear understanding with the other driver as to who will be in charge of communicating

with the signaller as the train goes forward (GSM-R ‘Lead Driver’).

Option 1 - Using the Train Crew Call function.

Before registering, the driver who has lead responsibility with the signaller must deregister

any existing registration code and then register in the normal way using the agreed five

digit registration and the location code.

The other driver (GSM-R ‘Driver 2’) can then register either with a driver’s key on or not

depending on circumstances; you must register via the menu:

, , ,

or by choosing the menu items you need using the scroll buttons.

GSM-R GB

Registration Code

Select func. ID

1 Lead Driver

2 Driver 2

3 Driver 3

Once the registration code has been accepted, you

will be prompted to choose the Driver 2 functional

role, from a numbered list.

Enter the same registration identity as the Lead

Driver using the keypad.

Press

to confirm entry of the information.

4 Show Registered..

1 Pre-register

3 Deregister

2 Register

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 86 87

Keine Kommentare

Siemens NRN 67 Series Spezifikationen Seite 53