Siemens NRN 67 Series Spezifikationen Seite 70
- Seite / 87
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
RSSB Page 70 of 87
GSM-R user procedures (cab radio Version 2)
If your first attempt to register that led to a
‘duplicate’ used a ‘99x’ then advise the
signaller of this and the signaller will provide an
alternative ‘99x’ to use.
The signaller may be able to clarify that the PA is shown on the fixed terminal and will
therefore be able to call the PA.
9.3.4 Wrong train reporting number displayed
If the train TRN displayed on the cab radio is not correct, deregister this number and try
registering again, with the same code. If this still returns an incorrect TRN, you must
deregister the TRN and contact the signaller controlling the movement of your train for
advice.
If the correct TRN is not shown, you must contact the signaller to check that your TRN is
shown on the signaller's fixed terminal. If the signaller confirms the correct TRN is
displayed, you may treat the radio as being correctly registered.
If the correct train TRN is not shown on the signaller's fixed terminal, you must treat the
registration as failed.
9.3.5 Duplicate registration identity
If the registration code is already in use by another cab radio, the network will reject your
registration and the message ‘duplicate’ will appear on the display. After checking that you
have entered the correct seven digits, you must contact the signaller controlling the
movement. The signaller will instruct you to use a 99x wild card location code which
should enable you to register successfully.
GSM-R GB
Registration failed
1A45 159 Duplicate
You can contact the signaller by calling them using the cab radio. However, because
the radio is not registered, you will need to find the number in the phonebook (see
section 6.6.2) or dial the signaller’s full number or the 12nn short code, if you have
access to it.
The registration code with the new 99x location code included can be entered whilst you
are still involved in the call with the signaller.
Press the button again and enter the registration code by pressing the appropriate
number keys, the digits will appear on the display and the registration process will be
automatically completed, once the call to the signaller is terminated.
If registration is still not possible but the radio is otherwise functioning correctly you must
report the problem to the signaller and follow the instructions that the signaller gives you.
9.3.6 Pending registration (trying to register if there is no coverage)
If you need to register the cab radio in a GSM-R area at a time when coverage is not
available due to network problems, you can set up the cab radio with the registration code
and it will automatically start the registration process once coverage is re-gained.
However, you will need to use the wild card 99X location code in order for the registration
process to be successful when you get network coverage again. Using the signal identity
- Issue 6.3 1
- June 2012 1
- Contents 2
- 5 of 87 5
- Issue status 7
- General information 7
- 1 Introduction 8
- 1.3 Definitions 9
- 10 of 87 10
- 2 The GSM-R systems 11
- 12 of 87 12
- 2.2 GSM-R call types 13
- 2.3 Point-to-Point calls 13
- 14 of 87 14
- 2.6 Call priorities 15
- 2.5 Call routing 15
- 2.9 Call divert 16
- 3 GSM-R system users 17
- 18 of 87 18
- 4 Where GSM-R works 19
- 4.3 Registration aliases 20
- 21 of 87 21
- 22 of 87 22
- 23 of 87 23
- Network Name Headcode 24
- Status 1 Action 24
- Call information 24
- Status 4Status 3Status 2 24
- 25 of 87 25
- Pre-registration ID 26
- 6 Entering service 29
- GSM-R GB 30
- < > 31
- Brightness 32
- < > 32
- 33 of 87 33
- Registration code 34
- 1A45 159 34
- GSM-R GB 1A45 35
- 36 of 87 36
- Deregistering 37
- 6.4 Keeping registration 38
- 6.6 Using phonebooks 39
- 6.7 Keypad dialling 39
- Yoker East 40
- Connected 40
- 7.1 Receiving a call 41
- Salisbury Panel 1 42
- Connected URGENT 42
- STOP EMERGENCY 43
- Connected PTT 43
- Terminating 44
- General Broadcast 45
- 7.3 Making calls 46
- GSM-R GB 1A26 48
- Signaller 48
- Calling Urgent 48
- Connected Urgent 49
- Emergency Group 50
- 51 of 87 51
- 52 of 87 52
- Select func. ID 53
- 1 Lead Driver 53
- 2 Driver 2 53
- 3 Driver 3 53
- Train crew __ 54
- 55 of 87 55
- 58 of 87 58
- 1 Hold/Swap Call 59
- 3 Remove Party 59
- 2 Join Calls 59
- Held Call Retrieved 60
- 61 of 87 61
- DSD Alarm 63
- Connected to PA 64
- DSD sent 64
- 8 Shunting mode 65
- 9 Trouble-shooting guide 66
- 67 of 87 67
- 68 of 87 68
- Registration failed 69
- 1A45 990 Lead Driver 69
- 70 of 87 70
- GSM-R GB 1A45 71
- PA Reg’d 71
- No network 72
- 73 of 87 73
- Handset test 74
- Press PTT 74
- GSM-R GB 1A51 74
- Loudspeaker test 75
- Yellow button test 76
- Release button 76
- 78 of 87 78
- Check PA Speech 79
- 80 of 87 80
- 1 De-activate 81
- 2 Change Number 81
- Meaning 82
- Possible causes 82
- Solution 82
- 82 of 87 82
- Displayed message 82
- 83 of 87 83
- 84 of 87 84
- 85 of 87 85
- 86 of 87 86
- 87 of 87 87
Verwandte Produkte und Handbücher für Kochfelder Siemens NRN 67 Series
Kochfelder Siemens ET 77E Series Spezifikationen
(42 Seiten)
(42 Seiten)
Kochfelder Siemens EF 88H Series Bedienungsanleitung
(121 Seiten)
(121 Seiten)
Kochfelder Siemens ET6..EE11 Bedienungsanleitung
(315 Seiten)
(315 Seiten)
Kochfelder Siemens ET1 Series Bedienungsanleitung
(109 Seiten)
(109 Seiten)
(68 Seiten)
Kochfelder Siemens ET8..TC.. Bedienungsanleitung
(34 Seiten)
(34 Seiten)
Kochfelder Siemens NAN 67 Series Wartungshandbuch
(318 Seiten)
(318 Seiten)
Kochfelder Siemens EH.85M.21E Wartungshandbuch
(750 Seiten)
(750 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.071 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern