Siemens OSM Betriebsanweisung PDF herunterladen (Seite 224)

Collect Diagnostic Data

This action collects diagnostic data for your system. Upon performing the action, you are prompted

to specify date and time parameters. Based on the date and time specified:

• Diagnostic events are collected for a period of 12 hours (configurable through OSMCONF

file) before and three hours after the specified date and time.

• Diagnostic Data files, such as ZZAAxxxx, ZZSNxxxx, and ZZPSxxxx, are collected for a period

of three hours starting from the specified date and time.

The volume in which this diagnostic data is collected is specified by the Set Data Collection Volume

action.

Compare HSS Firmware Versions

This action compares and displays the running Halted State Services (HSS) firmware version for

each Processor Blade on the system. Upon completion of the action (when state of the action is

“Passed”), select the action and click Details to see the HSS firmware version for each Processor

Blade.

Copy Core License to Alternate System Disk

Valid only for NonStop BladeSystem NB54000c and NB56000c, this action copies the core

license file from $SYSTEM to the specified alternate system disk.

Delete System Load Configuration

Allows you to delete one of the alternate system load configurations that is currently displayed

under the system object attributes.

These configurations are created through the System Load Configuration action (located under the

Disk, FC Disk, and CLIM-Attached Disk objects in the OSM Service Connection). It might be

necessary to delete one of the configurations if the specified disk is no longer a valid system disk,

or if you want to specify a new alternate system disk and there are already (the maximum number

of) four alternate system load configurations specified.

Detect New Hardware

This action is used during service procedures to detect any new Blade Element or LSU component

that had been disabled or isolated from the system by user.

NOTE: Generally, new hardware is detected dynamically once it is cabled. This action is only

required for recognizing components connected on a port that had been disabled.

Enable/Disable Automation of Data Collection

Use to enable or disable automatic collection of data for failed system resources. The current state

for the system is indicated by the Automatic Data Collection State attribute. If enabled, when a

hardware failure occurs, data is saved to the location specified by the Set Data Collection Volume

action. The Set Days to Persist for Diagnostic Data action determines how long the files are retained

on the system before being deleted.

Enable/Disable Blade Power Regulator Management

This action applies to HP Integrity NonStop BladeSystem NB54000c and NB56000c only. The

action enables or disables HP Power Regulator management on all processor blades in the system.

Upon enabling, processor performance may immediately change in response to Power Regulator

mode stored in each blade. Use HP Insight Control power management within HP SIM to view

and alter the mode for each processor blade in the system.

224 System Resources

1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 305 306

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens OSM Betriebsanweisung Seite 224

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Siemens OSM