Siemens OSM Betriebsanweisung PDF herunterladen (Seite 228)

For more information, see Insight Remote Support Advanced for NonStop, located in the Support

and Service collection of NTL.

Unsuppress Problem Incident Report Creation

Removes suppression caused by the Suppress Problem Incident Report Creation action. While this

suppression is automatically unsuppressed when the specified suppression time has been reached,

you can choose to end the suppression immediately using this action.

Update Running Core License

Valid only for NonStop BladeSystem NB54000c and NB56000c, this action is used when a core

license has been upgraded from 2-cores to 4-cores or when licenses for additional processors have

been added. The action instructs system software to read the new core license file and update the

core-enablement state. If the license file is valid, the action details will display the contents of the

license file. If the license file is not present, an error message instructs you to perform the Install

Core License File action.

Verify Power Fail Configuration

Verifies that the system is configured for Power Fail support.

Related System and Processor-Level Recovery Actions

Depending on your system type, these actions may be useful for system and processor recovery

operations:

• Power On System -- this OSM Low-Level Link action can be used to power on the system

following power fail scenarios or after using the System Power Off action, provided you are

using DNS on your LAN.

• Power Cycle All Processors -- located under the Group object in the OSM Low-Level Link, this

action can be used if the system is hung to power cycle all processors, processor boards, and

LSUs in the system.

• For Integrity NonStop NS16000 series servers:

To power cycle just one processor without affecting the others, use the Power Cycle LSU

action (located under the Logical Processor object in the OSM Service Connection) or

use the Hard Reset action on the processor in the OSM Low-Level Link.

◦

◦ To power cycle one processor board without affecting any processors in the complex,

use the Power Down Blade Element action (located under the Blade Element object in the

OSM Service Connection). The Blade Element is placed in low power mode for five

minutes before being powered back on.

Tape Collection

When one or more tape drives are connected to a system, a Tape Collection object appears in

both the tree pane and the overview pane of the OSM Service Connection. In both panes, this

object displays an alarm or yellow icon if alarms or degraded conditions exist on any of the

individual tape devices contained within. You can expand the Tape Collection icon in the tree

pane (but not in the overview pane) to select and monitor individual tape devices.

Location in OSM Tree: System > Tape Collection

Example: Tape Collection

Attributes

None.

228 System Resources

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 305 306

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens OSM Betriebsanweisung Seite 228

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Siemens OSM