Siemens HydroRanger 200 Bedienerhandbuch PDF herunterladen (Seite 166)

Page 152 HydroRanger 200 – INSTRUCTION MANUAL 7ML19981FC01

mmmmm

Parameters

Profile Records (P330 to P337)

These features can record up to ten Echo profiles, initiated manually (P330), or

automatically (P331 et al). See

Scope Displays

(P810) for echo profile viewing hardware /

software requirements. If ten Profiles are already saved, addresses 1 through 10 are

filled, the oldest automatically initiated record is overwritten. Manually initiated records

are not automatically overwritten. All records are automatically deleted in the event of a

power interruption.

When a record is displayed, results are based on current programming (which may have

been altered since the record was saved). This permits the effect on the echo profile to be

observed when changing an echo parameter.

P330 Profile Record

Records profiles for later viewing.

In addition to being a profile records library, this provides two functions:

• manually records and saves echo profiles

• displays an echo profile, recorded manually or automatically (oscilloscope)

Selecting a record address

1. Enter PROGRAM mode and press DISPLAY twice to highlight the index field.

The field shows two underscores _ _.

2. Type the index number. The profile record information is shown.

3. Use ARROWS to scroll through the records.

Primary Index Echo profile

Values

Code Description

---- no record

A1 automatically recorded profile from Transducer One

A2 automatically recorded profile from Transducer Two

U1 manually recorded profile from Transducer One

U2 manually recorded profile from Transducer Two

WARNING:

These parameters are for authorized service personnel or technicians familiar with

Siemens Milltronics echo processing techniques.

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 255 256

Keine Kommentare

Siemens HydroRanger 200 Bedienerhandbuch Seite 166