Siemens EF 711 Series Betriebsanweisung PDF herunterladen (Seite 120)

Configuring the Wireless AP

Configuring Wireless AP Settings

SCALANCE WLC711

3-32 C79000-G8976-C260-03, 07/2012, User Guide, V8.11

Auto Tx Power Ctrl Adjust If ATPC is enabled, click the Tx power level that can be used to

adjust the ATPC power levels that the system has assigned.

Siemens recommends that you to use 0 dB during your initial

configuration. If you have an RF plan that recommended Tx power

levels for each Wireless AP, compare the actual Tx power levels

your system has assigned against the recommended values your

RF plan has provided. Use the Auto Tx Power Ctrl Adjust value

to achieve the recommended values.

Channel Plan - Radio 1 If ACS is enabled, you can define a channel plan for the Wireless

AP. Defining a channel plan allows you to limit which channels are

available for use during an ACS scan. For example, you may want

to avoid using specific channels because of low power, regulatory

domain, or radar interference. Click one of the following:

All channels — ACS scans all channels for an operating channel

and returns both DFS and non-DFS channels, if available.

All Non-DFS Channels — ACS scans all non-DFS channels for

an operating channel. This selection is always available, but if

there are no DFS Channels available, the list is the same as the

All Channels list.

Custom — To configure individual channels from which the ACS

will select an operating channel, click Configure. The Custom

Channel Plan dialog displays. By default, all channels participate

in the channel plan. Click the individual channels you want to

include in the channel plan. To select contiguous channels, use

the Shift key. To select multiple, non-contiguous channels in the

list, use the CTRL key. Click OK to save the configuration.

Channel Plan - Radio 2 If ACS is enabled, you can define a channel plan for the Wireless

AP. Defining a channel plan allows you to limit which channels are

available for use during an ACS scan. For example, you may want

to avoid using specific channels because of low power, regulatory

domain, or radar interference. Click one of the following:

3 Channel Plan — ACS will scan the following channels: 1, 6, and

11 in North America, and 1, 7, and 13 in most other parts of the

world.

4 Channel Plan — ACS will scan the following channels: 1, 4, 7,

and 11 in North America, and 1, 5, 9, and 13 in most other parts of

the world.

Auto — ACS will scan the default channel plan channels: 1, 6,

and 11 in North America, and 1, 5, 9, and 13 in most other parts of

the world.

Custom — If you want to configure individual channels from

which the ACS will select an operating channel, click Configure.

The Add Channels dialog is displayed. Click the individual

channels you want to add to the channel plan while pressing the

CTRL key, and then click OK.

Table 3-9 Radio Properties (continued)

Field Description

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 491 492

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens EF 711 Series Betriebsanweisung Seite 120

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Siemens EF 711 Series