Siemens EF 711 Series Betriebsanweisung Seite 174

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 492
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 173
Configuring Topologies
Layer 3 Configuration
SCALANCE WLC711
4-6 C79000-G8976-C260-03, 07/2012, User Guide, V8.11
Layer 3 Configuration
This section describes configuring IP addresses, DHCP options, Next Hop and OSPF parameters,
for Physical port, Routed, and Bridge Traffic Locally at WLC topologies.
IP Address Configuration
The L3 (IP) address definition is only required for Physical port and Routed topologies. For Bridge
Traffic Locally at WLC topologies, L3 configuration is optional. L3 configuration would be
necessary if services such as DHCP, captive portal, AP registration (with up to 4 toplogies) are
required over the configured network segment or if controller management operations are
intended to be done through the configured interface.
Bridge Traffic Locally at AP VNSs do not require the definition of a corresponding IP address
since all traffic for users in that VNS will be directly bridged by the Wireless AP at the local
network point of attachment (VLAN at AP port).
To Define the IP Address for the Topology:
1. From the top menu, click Wireless Controller and then from the left pane select Topologies.
Alternatively, from the top menu select VNS Configuration and then press Topologies
button.
2. If already defined, click the topology you want to define the IP address for. The Topologies
window is displayed. Alternatively, press the New button to create a new topology.
Depending on the preselected options, two or three tabs are displayed.
3. For IP interface configuration for Routed topologies, configure the following Layer 3
parameters.
Seitenansicht 173
1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 491 492

Kommentare zu diesen Handbüchern

Keine Kommentare