
Configuring the Wireless AP
Configuring VLAN Tags for Wireless APs
SCALANCE WLC711
User Guide, V8.11, 07/2012, C79000-G8976-C260-03 3-57
Auto Tx Power Ctrl Click to either enable or disable ATPC from the Auto Tx Power
Ctrl drop-down list. ATPC automatically adapts transmission
power signals according to the coverage provided by the Wireless
APs. After a period of time, the system will stabilize itself based on
the RF coverage of your Wireless APs.
Max Tx Power Click the appropriate Tx power level from the Max TX Power
drop-down list. The values in the Max TX Power drop-down are in
dBm.
Min Tx Power If ATPC is enabled, click the minimum Tx power level to which the
range of transmit power can be adjusted: 0 to 23 (b/g or b/g/n) or
24 (a or a/n) dBm. Siemens recommends that you use 0 dBm if
you do not want to limit the potential Tx power level range that can
be used.
Auto Tx Power Ctrl Adjust If ATPC is enabled, click the Tx power level that can be used to
adjust the ATPC power levels that the system has assigned.
Siemens recommends that use 0 dBm during your initial
configuration. If you have an RF plan that recommends Tx power
levels for each Wireless AP, compare the actual Tx power levels
your system has assigned against the recommended values your
RF plan has provided. Use the Auto Tx Power Ctrl Adjust value
to achieve the recommended values.
Table 3-11 AP Default Settings (continued)
Field Description
Kommentare zu diesen Handbüchern