Siemens EF 711 Series Betriebsanweisung PDF herunterladen (Seite 78)

Configuring the SCALANCE IWLAN Controller

Configuring the SCALANCE IWLAN Controller for the First Time

SCALANCE WLC711

2-48 C79000-G8976-C260-03, 07/2012, User Guide, V8.11

– Read/Write Community Name — The password that is used for write SNMP

communication.

– Manager A — The IP address of the server used as the primary network manager that will

receive SNMP messages.

– Manager B — The IP address of the server used as the secondary network manager that

will receive SNMP messages.

Note:

Manager A and Manager B address fields support both IPv4 or IPv6 addresses.

2. Click Save.

Configuring SNMPv3-specific Parameters

1. Configure the parameters following on the SNMPv3 tab:

– Context String — A description of the SNMP context.

– Engine ID — The SNMPv3 engine ID for the SCALANCE IWLAN Controller running the

SNMP agent. The engine ID must be from 5 to 32 characters long.

– RFC3411 Compliant — The engine ID will be formatted as defined by SnmpEngineID

textual convention (that is, the engine ID will be prepended with SNMP agents' private

enterprise number assigned by IANA as a formatted HEX text string).

2. Click Add User Account. The Add SNMPv3 User Account window displays.

3. Configure the following parameters:

– User — Enter the name of the user account.

– Security Level — Select the security level for this user account. Choices are: authPriv,

authNoPriv, noAuthnoPriv.

– Auth Protocol — If you have selected a security level of authPriv or authNoPriv, select

the authentication protocol. Choices are: MD5, SHA, None.

– Auth Password — If you have selected a security level of authPriv or authNoPriv, enter

an authentication password.

– Privacy Protocol — If you have selected the security level of authPriv, select the privacy

protocol. Choices are: DES, None

– Privacy Password — If you have selected the security level of authPriv, enter a privacy

password.

– Engine ID — If desired, enter an engine ID. The ID can be between 5 and 32 bytes long,

with no spaces, control characters, or tabs.

– Destination IP — If desired, enter the IP address of a trap destination.

Note:

The Destination IP address field supports both IPv4 or IPv6 addresses.

4. Click OK. The Add SNMPv3 User Account window closes.

5. Repeat steps 2 through 4 to add additional users.

6. In the Trap 1 and Trap 2 sections, configure the following parameters:

– Destination IP — The IP address of the machine monitoring SNMPv3 traps

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 491 492

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens EF 711 Series Betriebsanweisung Seite 78

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Siemens EF 711 Series