Siemens EF 711 Series Betriebsanweisung PDF herunterladen (Seite 316)

Configuring Classes of Service

CoS Rule Classification

SCALANCE WLC711

8-4 C79000-G8976-C260-03, 07/2012, User Guide, V8.11

CoS Rule Classification

Classification is the process of finding the first matching rule that defines a CoS for an incoming

packet. The order of classification is as follows:

1. Use the CoS assigned by the first policy rule matched by the packet that explicitly assigns a

CoS.

2. If no CoS found, use the default CoS of the Policy.

ToS/DSCP Marking Select this checkbox to define how the Layer 3 ToS/DSCP will be

marked.

Enter a hexadecimal value in the 0x (DSCP:) field,

Click the Select button to open the ToS/DSCP Configuration

dialog. For more information, see Configuring ToS/DSCP Marking.

Note: This selection is not available if Legacy Priority Override is

checked.

Mask: 0x Displays the hexadecimal value to use for the ToS/DSCP value.

For example, if the mask is 0xF0, then only the four most

significant bits of the ToS of the received packets are marked. So,

if the received ToS is 0x33 and the ToS marking is set to 0x2A,

then the resulting ToS is 0x23.

Rate Limiting

Inbound Rate Limit Select this checkbox, and then select an inbound rate limit from

the drop-down list or click the New button to create a new inbound

rate limit profile.

To edit an existing inbound rate limit profile, select the profile from

the drop-down list and then click the Edit button.

For more information, see Rate Limiting.

Outbound Rate Limit Select this checkbox, and then select an outbound rate limit from

the drop-down list or click the New button to create a new

outbound rate limit profile.

To edit an existing outbound rate limit profile, select the profile

from the drop-down list and then click the Edit button.

For more information, see Rate Limiting.

Transmit Queue Assignment

Transmit Queue Select this checkbox, and select a Transmit Queue from the drop-

down list.

The Transmit Queue assignment is an override to the default TXQ

assignment specified in the 802.1p priority, but without remarking

the actual 802.1p field.

Status

Synchronize Click to enable synchronization of this CoS to the peer controller in

the availability pair.

Table 8-1 General Tab - Fields and Buttons (continued)

Field/Button Description

1 2 ... 311 312 313 314 315 316 317 318 319 320 321 ... 491 492

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens EF 711 Series Betriebsanweisung Seite 316

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Siemens EF 711 Series