Siemens EF 711 Series Betriebsanweisung PDF herunterladen (Seite 261)

Configuring a VNS

Methods for Configuring a VNS

SCALANCE WLC711

User Guide, V8.11, 07/2012, C79000-G8976-C260-03 7-21

Methods for Configuring a VNS

To configure a VNS, you can use one of the following methods:

• Manual configuration — Allows you to create a new VNS by first configuring the topology,

policy, and WLAN services and then configuring any remaining individual VNS tabs that are

necessary to complete the process.

When configuring a VNS, you can navigate between the various VNS tabs and define your

configuration without having to save your changes on each individual tab. After your VNS

configuration is complete, click Save on any VNS tab to save your completed VNS

configuration.

Note:

If you navigate away from the VNS configuration tabs without saving your VNS changes, your VNS

configuration changes will be lost.

• Wizard configuration — The VNS wizard helps create and configure a new VNS by

prompting you for a minimum amount of configuration information. The VNS is created

using minimum parameters. The remaining parameters are automatically assigned in

accordance with best practice standards.

After the VNS wizard completes the VNS creation process, you can then edit or revise any of

the VNS configuration to suit your network needs.

Manually Creating a VNS

Advanced configuration allows administrators to create a new VNS once the topology, policy, and

WLAN services required by the VNS parameters are available. The topology, policy and WLAN

services could be created in advance or could be created at the time of VNS configuration.

When you create a new VNS, additional tabs are displayed depending on the selections made in

the Core box of the main VNS configuration tab.

When configuring a VNS, you can navigate between the various VNS tabs and define your

configuration without having to save your changes on each individual tab. After your VNS

configuration is complete, click Save on any VNS tab to save your complete VNS configuration.

Note:

If you navigate away from the VNS Configuration tabs without saving your VNS changes, your VNS

configuration changes will be lost.

The following procedure lists the steps necessary to create a VNS in advanced mode. Each step

references a section in this document that describes the full details. Follow the links provided to

go directly to the appropriate sections.

To Create a VNS Manually:

1. From the top menu, click VNS Configuration. The Virtual Network Configuration screen is

displayed.

1 2 ... 256 257 258 259 260 261 262 263 264 265 266 ... 491 492

Keine Kommentare

Siemens EF 711 Series Betriebsanweisung Seite 261