Siemens EF 711 Series Betriebsanweisung PDF herunterladen (Seite 126)

Configuring the Wireless AP

Configuring Wireless AP Settings

SCALANCE WLC711

3-38 C79000-G8976-C260-03, 07/2012, User Guide, V8.11

Note:

Do not disable 802.11g protection mode if you have 802.11b or 802.11g client devices using this Wireless AP;

instead, configure only Radio 1 for high throughput unless it is acceptable to achieve less than maximum

802.11n throughput on Radio 2.

– If only 802.11n devices are present, you must disable 11n protection and 40MHz

protection:

- Protection Mode — Click None.

- Protection Type — Click CTS only or RTS CTS.

Note:

Do not disable 802.11n protection mode if you have 802.11b or 802.11g client devices using this Wireless AP;

instead, configure only Radio 1 for high throughput unless it is acceptable to achieve less than maximum

802.11n throughput on Radio 2.

– Aggregate MSDUs — Click Enabled.

– Aggregate MPDU — Click Enabled.

– Aggregate MPDU Max Length — Click 65535

– Agg. MPDU Max # of Sub-frames — Type 64.

– ADDBA Support — Click Enabled.

4. Click the Radio 1 tab, and then do the following:

– In the Admin Mode drop-down list, click the On option.

– In the Radio Mode drop-down list, click the a/n option.

– In the Channel Width drop-down list, click 40MHz.

– In the Guard Interval drop-down list, click Short.

– If only 802.11n devices are present, you must disable 11n protection and 40MHz

protection:

- Protection Mode — Click None.

- Protection Type — Click CTS only or RTS CTS.

– Aggregate MSDUs — Click Enabled.

– Aggregate MPDU — Click Enabled.

– Aggregate MPDU Max Length — Click Enabled.

– Agg. MPDU Max # of Sub-frames — Type 64.

– ADDBA Support — Click Enabled.

5. From the top menu, click VNS Configuration. The Virtual Network Configuration screen is

displayed.

6. In the left pane Virtual Networks list, click the VNS you want to configure. The Topology tab

is displayed.

7. Click the Privacy tab. Some client devices will not use 802.11n mode if they are using WEP or

TKIP for security. Therefore, do one of the following:

– Select None.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 491 492

Keine Kommentare

Siemens EF 711 Series Betriebsanweisung Seite 126