Siemens EF 711 Series Betriebsanweisung Seite 54

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 492
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 53
Configuring the SCALANCE IWLAN Controller
Configuring the SCALANCE IWLAN Controller for the First Time
SCALANCE WLC711
2-24 C79000-G8976-C260-03, 07/2012, User Guide, V8.11
Ensure that the OSPF parameters defined here for the SCALANCE IWLAN Controller are
consistent with the adjacent routers in the OSPF area. This consistency includes the following:
If the peer router has different timer settings, the protocol timer settings in the SCALANCE
IWLAN Controller must be changed to match to achieve OSPF adjacency.
The MTU of the ports on either end of an OSPF link must match. The MTU for ports on the
SCALANCE IWLAN Controller is fixed at 1500. This matches the default MTU in standard
routers.
To Set OSPF Routing Global Settings on the SCALANCE IWLAN Controller:
1. From the top menu, click Wireless Controller. The Wireless Controller Configuration screen
is displayed.
2. In the left pane, click Routing Protocols. The Static Routes tab is displayed by default.
3. Click the OSPF tab.
4. From the OSPF Status drop-down list, click On to enable OSPF.
In the Router ID box, type the IP address of the SCALANCE IWLAN Controller. This ID must
be unique across the OSPF area. If left blank, the OSPF daemon automatically picks a router
ID from one of the SCALANCE IWLAN Controller’s interface IP addresses.
5. In the Area ID box, type the area. 0.0.0.0 is the main area in OSPF.
6. In the Area Type drop-down list, click one of the following:
Default — The default acts as the backbone area (also known as area zero). It forms the
core of an OSPF network. All other areas are connected to it, and inter-area routing
happens via a router connected to the backbone area.
Seitenansicht 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 491 492

Kommentare zu diesen Handbüchern

Keine Kommentare