Siemens EF 711 Series Betriebsanweisung Seite 194

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 492
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 193
Configuring Policies
Filtering Rules
SCALANCE WLC711
5-10 C79000-G8976-C260-03, 07/2012, User Guide, V8.11
In Identifies the rule that applies to traffic from the wireless device
that is trying to get on the network. You can change this setting
using the drop-down menu. Options include:
Destination (dest) - available in Advanced Filtering Mode only
Source (src)
None
Both - available in Advanced Filtering Mode only
The policy for inbound traffic may be impacted by the selection
(mode) for Egress Filtering. For more information, see Configuring
Egress Filtering Mode.
Out Identifies the rule that applies to traffic from the network host that
is trying to get to a wireless device. You can change this setting
using the drop-down menu. Options include:
Destination (dest)
Source (src) - available in Advanced Filtering Mode only
None
Both - available in Advanced Filtering Mode only
The policy for outbound traffic may be impacted by the selection
(mode) for Egress Filtering. For more information, see Configuring
Egress Filtering Mode.
Allow Select the Allow checkbox to allow this rule. Otherwise the rule is
denied.
IP:Port Identifies the IP address and port to which this filter rule applies.
Protocol In the Protocol drop-down list, click the applicable protocol. The
default is N/A.
Up, Down Select a filter rule and click to either move the rule up or down in
the list. The filtering rules are executed in the order in which you
define them.
Add Click to add a filter rule. The fields in the Add Filter area are
enabled.
Delete Click to remove this filter rule.
Save Click to save the configuration.
Add Filter section
IP/subnet Select one of the following:
User Defined, then type the destination IP address and mask.
Use this option to explicitly define the IP/subnet aspect of the
filter rule.
IP - select to map the rule to the associated Topology IP
address.
Subnet - select to map the rule to the associated Topology
segment definition (IP address/mask).
Table 5-10 WLC and AP Filters Tabs - Fields and Buttons (continued)
Field/Button Description
Seitenansicht 193
1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 491 492

Kommentare zu diesen Handbüchern

Keine Kommentare