
Configuring Topologies
Configuring the Admin Port
SCALANCE WLC711
User Guide, V8.11, 07/2012, C79000-G8976-C260-03 4-3
3. To change any of the associated Admin parameters, click on the Admin topology entry. An
“Edit Topology” pop up window appears.
4. Under Core, the Admin port Name and Mode are not configurable.
5. Under Layer 3 - IPv4, the following settings are available:
• The Static IP Address specifies the address assigned by the administrator.
• In the Mask field, type the appropriate subnet mask for the IP address (typically,
255.255.255.0).
• The MTU value specifies the Maximum Transmission Unit or maximum packet size for
this topology. The fixed value is 1500 bytes for physical topologies.
• The Gateway field specifies the IP address of the default gateway for the Admin port.
6. Under Layer 3 - IPv6, the following settings are available:
• The Static IPv6 Address field specifies the address assigned by the administrator.
• The Static IPv6 Gateway field specifies the IP address of the default gateway for the
Admin port.
• The Prefix Length field specifies the length of the IPv6 prefix. Maximum is 64 bits.
• The MTU value specifies the Maximum Transmission Unit or maximum packet size for
this topology. The fixed value is 1500 bytes for physical topologies.
• The Dynamic IP Address lists the current auto-generated IPv6 addresses assigned to the
Admin port.
Kommentare zu diesen Handbüchern