Siemens EF 711 Series Betriebsanweisung PDF herunterladen (Seite 137)

Configuring the Wireless AP

Configuring VLAN Tags for Wireless APs

SCALANCE WLC711

User Guide, V8.11, 07/2012, C79000-G8976-C260-03 3-49

2. In the Wireless AP list, click the Wireless AP for which you want to configure 802.1x EAP-TLS

authentication.

3. Click the 802.1x tab.

4. Click Browse. The Choose file window is displayed.

5. Navigate to the location of the certificate file (.pfx) and click Open. The name of the certificate

file is displayed in the X509 DER / PKCS#12 file box.

6. In the Password box, type the password that was used to protect the private key.

7. To save your changes, click Save.

The 802.1x EAP-TLS authentication in pass through mode is assigned to the Wireless AP. The

Wireless AP can now be deployed to a 802.1x enabled switch port.

Viewing 802.1x Credentials

When 802.1x authentication is configured on a Wireless AP, the light bulb icon on the 802.1x tab

for the configured Wireless AP is lit to indicate which 802.1x authentication method is used. A

Wireless AP can be configured to use both EAP-TLS and PEAP authentication methods. For

example, when both EAP-TLS and PEAP authentication methods are configured for the Wireless

AP, both light bulb icons on the 802.1x tab are lit.

Note: You can only view the 802.1x credentials of Wireless APs that have an active session with the

SCALANCE IWLAN Controller. If you attempt to view the credentials of a Wireless AP that does not have an

active session, the Wireless AP Credentials window displays the following message:

Unable to query Wireless AP: not connected.

To View Current 802.1x Credentials:

1. From the top menu, click Wireless APs. The Wireless AP screen is displayed.

2. In the Wireless AP list, click the Wireless AP for which you want to view its current 802.1x

credentials.

3. Select the 802.1x tab.

4. In the Current Credentials section, click Get Certificate details. The Wireless AP Credentials

window is displayed.

Deleting 802.1x Credentials

To Delete Current 802.1x Credentials:

1. From the top menu, click Wireless APs. The Wireless AP screen is displayed.

2. In the Wireless AP list, click the Wireless AP for which you want to delete its current 802.1x

credentials.

NOTICE

Caution: Exercise caution when deleting 802.1x credentials. For example, deleting 802.1x credentials may

prevent the Wireless AP from being authenticated or cause it to lose its connection with the SCALANCE

IWLAN Controller.

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 491 492

Keine Kommentare

Siemens EF 711 Series Betriebsanweisung Seite 137