Siemens SIMATIC TI500 Spezifikationen Seite 158

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 322
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 157
5-17
Installing Remote Base ControllersRBCs
SIMATIC 545/555/575 System Manual
Switches 1 through 3 on the dipswitch control the baud rate of the
RS-232/423 port. Table 5-6 lists the baud rates available.
Invalid selections cause the RBC to report an error on the Status Display
and cause the RS-232/423 port to default to 9600 baud.
The RS-232/423 baud rate switch settings are read only on power-up or
after pressing the reset button.
NOTE: The RS-232 port is disabled by default. To enable the port, change
the default parameter of the module in COM PROFIBUS. (See Table 5-9.)
Table 5-6 RS-232 Port Baud Rate Settings
Baud Rate Switch 1 Switch 2 Switch 3
38400 0 0 1
19200 1 1 1
9600 1 1 0
2400 1 0 0
1200 0 1 0
300 0 0 0
INVALID 0 1 1
INVALID 1 0 1
Switches 4 through 10 on the dipswitch are used to assign a station address
to the RBC for identification in the PROFIBUS-DP I/O channel. Each
station in the PROFIBUS-DP I/O channel must be uniquely numbered. The
station address is assigned as a binary number, with SW10 as the Least
Significant Bit (LSB). Table 5-7 shows how to set the dipswitch to a station
address between 0 and 125 (the valid range of station addresses).
The station address switch settings are read only on powerup or after
pressing the reset button.
!
WARNING
Pressing the RESET button when the system is operating causes the RBC to be
logged off the system and may change the output states of the output modules
in the base. Logging the RBC off the system or changing output states
inadvertently can cause unpredictable process operation.
Unpredictable process operation can result in death or serious injury to
personnel, and/or damage to equipment.
Do not push the reset button unless you intend to log the RBC off the system.
Baud Rate for the
RS-232 Port
Assigning the RBC
Station Address
Seitenansicht 157
1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 321 322

Kommentare zu diesen Handbüchern

Keine Kommentare