Siemens SPCK421 Spezifikationen PDF herunterladen (Seite 119)

Engineer programming via the browser

Logging into the browser

119

Siemens AB

A6V10276959

Security Products

18.11.2011

4. On the following window, choose Guest.

5. On the following window, choose the name of the connection.

 On the Select a Device window, the PC highlights an available serial port

for use with the connection. This port should be the COM port that the USB

device is using.

6. Click Next.

7. On the following window, choose whether this connection is available to all

users.

8. Click Finish.

9. The PC prompts for username and password for the USB connection. Enter the

following details:

- Username: SPC

- Passwort: siemens (default)

10. Click Connect.

 The PC initiates a data link with the controller. When the link has been

established, a connection icon appears on the task bar at the bottom of the

PC screen.

11. Right-click the link and select Status.

 A server IP address is displayed in the details window.

12. Enter this address into the address bar of an internet browser using the hyper

text transfer protocol secure (e.g. https:\\192.168.5.1).

Default code should be changed and noted accordingly as Siemens

is unable to retrieve this new code. Forgotten codes are remedied only by a

factory default of the system, rendering loss of programming. Programming can

be restored if a backup is available.

15.3 Logging into the browser

To log into the browser:

1. Once an Ethernet or USB link has been established and the IP address of the

controller determined, open the PC browser.

2. Enter the IP address in the address bar using the hyper text transfer protocol

secure. See table below.

 A window with a security message is displayed.

3. Click Continue to this website.

 The login screen is displayed.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 295 296

Keine Kommentare

Siemens SPCK421 Spezifikationen Seite 119