Siemens SPCK421 Spezifikationen PDF herunterladen (Seite 191)

Engineer programming via the browser

X-BUS

191

Siemens AB

A6V10276959

Security Products

18.11.2011

Description

Enter a unique description to identify the keypad.

Function Keys (in idle state)

Panic

Select Enable, Disable or Enabled Silent. If enabled, panic alarm is activated by

pressing the 2 soft keys together.

Visual Idications

Backlight

Select when keypad backlight is on. Options are: - On after key is pressed;

Always on; Always off..

Indicators

Enable or disable the LED’s on the keypad.

Setting state

Select if setting state should be indicated in idle mode.

Audible Indications

Buzzer

Enable or disable the buzzer on the keypad.

Partset Buzzer

Enable or disable buzzer during exit time on Partset.

Keypress

Select if the speaker volume for the key presses should be activated.

Deactivation

Calendar

Select if the keypad should be limited by calendar. See Calendar [➙ 236].

Mapping gate

Select if keypad should be limited by a mapping gate.

Keyswitch

Select if keypad should be limited by a keyswitch.

PACE Entry

Tick this box to disable the keys on the keypad during the entry time when a

PACE is configured on the keypad.

Areas

Location

Select the secured area where the keypad is located.

Areas

Select which areas can be controlled through keypad.

Options

Delay Fullset

Select to configure a delayed set across all keypads. The location of the keypad

is ignored and all areas will perform a full exit time count down.

NOTICE

An area should be assigned to a keypad only if the keypad is inside the assigned

area, and if an entry/exit route is defined. If an area is assigned, when the

particular area is set or unset then entry and exit timers are used (if configured).

Other features related to entry/exit routes also become available. If no area is

assigned, the area is set or unset immediately and other entry/exit features are

not available

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens SPCK421 Spezifikationen Seite 191

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ziffernblock Siemens SPCK421