Siemens SPCK421 Spezifikationen PDF herunterladen (Seite 80)

Engineer programming via the keypad

TIMERS

Siemens AB

A6V10276959

Security Products

18.11.2011

Timer

Description

Default

FULLSET STROBE

indicate a full set condition. (0 – 10 seconds)

Final Exit

FINAL EXIT

The Final Exit time is the number of seconds that arming is

delayed after a zone programmed with the final exit attribute

is closed. (1 – 45 seconds)

7 sec.

Tech. delay

TECH. DELAY

Number of seconds to delay triggering of tech. zones with

tech. delay attribute. (0 – 9999 seconds)

0 sec.

Fail To Set

FAIL TO SET

Number of seconds to display fail to set message on keypads

(0 until valid PIN is entered). (0 – 999 seconds)

10 sec.

Confirm

CONFIRM TIME



Note: Only available when Security Grade is

‘Unrestricted’ and ‘DD243’ is selected for ‘Confirmation’

variable. (See System Options [➙ 154])

This timer applies to the alarm confirmation feature and is

defined as the maximum time between alarms from two

different non overlapping zones that will cause a confirmed

alarm. (30 – 60 minutes)

30 min.

Exit*

EXIT TIME

The time period allowed for the user to exit the building after

setting the system. The exit time will be counted down at the

keypad as the buzzer beeps to indicate to the user that the

system will arm when the exit timer reaches zero.

45 sec.

Entry*

ENTRY TIME

The time period allowed for the user to UNSET the alarm

after opening an entry/exit zone of an armed system.

45 sec.

Frequent

FREQUENT

This attribute only applies to Remote Maintenance. The

number of hours a zone must open within if the zone is

programmed with the Frequent use attribute. (1 – 9999 hours)

336 hours (2

weeks)

Fire Pre-alarm

FIRE PRE-ALARM

Number of seconds to wait before reporting file alarm for

zones with ‘Fire pre-alarm’ attribute set. (1 – 999 seconds)

See Editing a Zone [➙ 165].

30 sec.

Fire recognition

FIRE RECOGNITION

Extra time to wait before reporting file alarm for zones with

‘Fire pre-alarm’ and ‘Fire Recognition’ attributes set. (1 – 999

seconds) See Editing a Zone [➙ 165].

120 sec.

Alarm abort

ALARM ABORT

Time after a reported alarm in which an alarm abort message

can be reported. (0 – 999 seconds))

30 sec.

Seismic Test Interval

SEISMIC AUTOTEST

The average period between seismic sensor automatic tests

(12 – 240 hours)

Note: To enable automatic testing, the Automatic Sensor Test

attribute must be enabled for a seismic zone.

168 hours.

Seismic Test Duration

SEISMIC TEST DUR

Maximum time (in seconds) that a seismic sensor takes to

trigger an alarm in response to the 'Seismic Test' output.

(3 - 120 seconds)

30 sec.

RF Output Time

RF OUTPUT

The time that the RF output will remain active on the system.

(0 – 999 seconds)

0 sec.

Time Sync Limit

TIME SYNC LIMIT

Time synchronisation only takes place if system time and

update time are outside this limit.

0 sec.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 295 296

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens SPCK421 Spezifikationen Seite 80

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ziffernblock Siemens SPCK421