Siemens SINUMERIK 802D sl Spezifikationen PDF herunterladen (Seite 207)

NCK alarms/ISO alarms

06/2007 Overview of alarms

2-207

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

17503 Channel %1 block %2 indexing axis %3 with Hirth tooth system and axis

not referenced

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis name

Definitions: The 'Hirth tooth system' function is activated for the indexing axis and the axis is to be traversed

although it is not referenced.

Reaction: Alarm display.

Remedy: Reference axis.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

17510 Channel %1 block %2 invalid index for indexing axis %3

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis name, spindle number

Definitions: The programmed index for the indexing axis is beyond the position table range.

Example:

Perform an absolute approach of the 56th position in the list allocated via the axis-specific machine

date 30500 INDEX_AX_ASSIGN_POS_TAB with the 1st positioning axis, the number of positions is

e.g. only 40 (MD 10900 INDEX_AX_LENGTH_POS_TAB_1 = 40).

N100 G.. U=CAC (56)

Or, with equidistant distances, the programmed index is smaller or equal 0.

Or, an attempt is made with a MOV movement to travel to a position outside the permitted area.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Program the indexing axis position in the NC part program in accordance with the length of the current

position table, or add the required value to the position table and adjust the length of the list.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

17600 Channel %1 block %2 preset on transformed axis %3 not possible

Parameters: %1 = channel number

%2 = block number, label

%3 = axis name, spindle number

Definitions: The programmed preset axis is involved in the current transformation. This means that is it not possi-

ble to set the actual value memory (preset) for this axis.

Example:

Machine axis A must be set to the new actual value A 100 at the absolute position A 300.

Example:

N100 G90 G00 A=300

N101 PRESETON A=100

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Avoid preset actual value memory for axes which are participating in a transformation or deselect the

transformation with vocabulary word TRAFOOF.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 391 392

Siemens SINUMERIK 802D sl Spezifikationen Seite 207

Kommentare zu diesen Handbüchern

Siemens SINUMERIK 802D sl Spezifikationen Seite 207

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl