Siemens SINUMERIK 802D sl Spezifikationen PDF herunterladen (Seite 244)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-244

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

22053 Channel %1 block %3 spindle %2 reference mode not supported

Parameters: %1 = channel number

%2 = axis name, spindle number

%3 = block number, label

Definitions: In the case of SPOS with an absolute encoder, only the referencing mode MD 34200

ENC_REFP_MODE = 2 is supported! ENC_REFP_MODE = 6 is not supported by SPOS!

Reaction: NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Change setting in MD 34200 ENC_REFP_MODE, switch to JOG + REF and then reference.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

22054 Channel %1 block %3 spindle %2 improper punching signal

Parameters: %1 = Channel number

%2 = Axis name, spindle number

%3 = Block number, label

Definitions: If the punching signal is irregular between the punching strokes, this alarm is generated according to

machine data.

Reaction: Alarm display.

Remedy: Indicates poor condition of the punching hydraulics.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

22055 Channel %1 block %3 spindle %2 configured positioning speed is too

high

Parameters: %1 = channel number

%2 = axis name, spindle number

%3 = block number, label

Definitions: The current position is not referenced with the measuring system position although reference is made

to it.

Reaction: Alarm display.

Remedy: Modify part program. Establish zero mark synchronization by positioning, by rotation (at least 1 revo-

lution) in speed control mode or G74 before switching the alarm generating function on.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

22060 Channel %1 position control expected for axis/spindle %2

Parameters: %1 = channel number

%2 = axis name, spindle number

Definitions: The programmed coupling type (setpoint or actual-value coupling) or the programmed function

requires position control.

Reaction: Alarm display.

Remedy: Activate position control, e.g. by programming SPCON.

Program Con-

tinuation:

Alarm display showing cause of alarm disappears. No further operator action necessary.

22062 Channel %1 axis %2 reference point approach: zero marker search

velocity (MD) is not reached

Parameters: %1 = channel number

%2 = axis name, spindle number

Definitions: The configured zero mark search velocity is not reached.

Reaction: NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 391 392

Siemens SINUMERIK 802D sl Spezifikationen Seite 244

Kommentare zu diesen Handbüchern

Siemens SINUMERIK 802D sl Spezifikationen Seite 244

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl