Siemens SINUMERIK 802D sl Spezifikationen PDF herunterladen (Seite 56)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-56

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

10207 Channel %1 error when selecting or deselecting the digitize function

Parameters: %1 = Channel number

Definitions: An error has occurred on activating/deactivating the digitizing module; e.g. not in channel ready state,

already activated, etc.

Reaction: Alarm display.

Remedy: Press RESET.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

10208 Channel %1 continue program with NC start

Parameters: %1 = channel number

Definitions: After block search with calculation, the control is in the desired state.

The program can now be started with NC Start or the state can be changed for the time being with

overstore/jog.

Reaction: Interpreter stop

Alarm display.

NC Stop on alarm.

Remedy: Press NC Start

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

10209 Channel %1 internal NC stop after block search

Parameters: %1 = Channel number

Definitions: Internal alarm which only initiates the alarm response NC Stop.

The alarm is output in the following situations:

- If $MN_SEARCH_RUN_MODE bit 0 ==1 and the last action block is loaded in the main run after

block search. Alarm 10208 is then activated as a function of the VDI signal PLC -> NCK channel

DBB1.6.

- Search alarm 10208 has been suppressed by the PI service _N_FINDBL (third decade of the param-

eter supplied with "2"). Alarm 10209 is set as a function of whether or not a search ASUB has been

configured ( $MN_SEARCHRUN_MODE bit 1) with the end of the search ASUB or the loading of the

last action block in the main run.

Reaction: Interpreter stop

NC Stop on alarm.

Remedy: NC-Start

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

10225 Channel %1: command denied

Parameters: %1 = channel number

%2 = string (event name)

Definitions: The channel contains a command that cannot be executed.

Reaction: Alarm display.

Remedy: Press RESET

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 391 392

Siemens SINUMERIK 802D sl Spezifikationen Seite 56

Kommentare zu diesen Handbüchern

Siemens SINUMERIK 802D sl Spezifikationen Seite 56

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl