Siemens SINUMERIK 802D sl Spezifikationen PDF herunterladen (Seite 324)

Overview of alarms 06/2007

Cycle alarms

2-324

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62184 Channel %1 block %2 : replace inclinable head: %4

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE800.

Reaction: Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62300 Channel %1 Block %2: Check number of empirical value memory

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: --

Reaction: Alarm display.

Remedy: Check setpoint value

Increase parameter _TSA

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62304 Channel %1 Block %2: Allowance

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE974, CYCLE977, CYCLE978, CYCLE979,

CYCLE994.

Reaction: Alarm display.

Remedy: The difference between actual and setpoint value is larger than upper tolerance limit (parameter

_TUL).

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62308 Channel %1 Block %2: Variable column width not possible

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE105.

Unable to generate variable column widths, as no header available.

A fixed column width of 12 characters is used.

Reaction: Alarm display.

Remedy: Complete the header in _PROTVAL[0].

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62309 Channel %1 Block %2: Insufficient column width

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE105.

The value to be logged is larger than the column width.

Reaction: Alarm display.

Remedy: Adjust _PROTFORM[5] or change the header at variable column width.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62311 Channel %1 block %2: The maximum number of characters per line

_PROTFORM[1] is adjusted.

Parameters: %1 = Channel number

%2 = Block number, label channel number

1 2 ... 319 320 321 322 323 324 325 326 327 328 329 ... 391 392

Siemens SINUMERIK 802D sl Spezifikationen Seite 324

Kommentare zu diesen Handbüchern

Siemens SINUMERIK 802D sl Spezifikationen Seite 324

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl