Siemens SINUMERIK 802D sl Spezifikationen PDF herunterladen (Seite 214)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-214

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

18101 Channel %1 block %2 invalid value assigned to FXST[]

Parameters: %1 = channel number

%2 = block number, label

Definitions: Only the range 0.0 - 100.0 is valid at the present time.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

18102 Channel %1 block %2 invalid value assigned to FXSW[]

Parameters: %1 = channel number

%2 = block number, label

Definitions: Only positive values including zero are valid at the present time.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

18300 Channel %1 block %2 frame: fine shift not possible

Parameters: %1 = channel number

%2 = block number, label

Definitions: Allocation of a fine offset to settable frames or the basic frame is not possible since MD 18600

MM_FRAME_FINE_TRANS is not equal to 1.

Reaction: Interpreter stop

Interface signals are set.

Alarm display.

Remedy: Please inform the authorized personnel/service department. Modify program or set MD 18600

MM_FRAME_FINE_TRANS to 1.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

18310 Channel %1 block %2 frame: illegal rotation

Parameters: %1 = channel number

%2 = block number, label

Definitions: Rotations are not possible with global frames.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Modify part program.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

18311 Channel %1 block %2 frame: illegal instruction

Parameters: %1 = channel number

%2 = block number, label

Definitions: An attempt was made to read or write a frame which does not exist.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Modify part program.

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 391 392

Siemens SINUMERIK 802D sl Spezifikationen Seite 214

Kommentare zu diesen Handbüchern

Siemens SINUMERIK 802D sl Spezifikationen Seite 214

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl