Siemens SINUMERIK 802D sl Spezifikationen PDF herunterladen (Seite 29)

NCK alarms/ISO alarms

06/2007 Overview of alarms

2-29

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

Remedy: Please inform the authorized personnel/service department.

Remove rotary axis declaration for this machine axis.

For this purpose, the geometry axis index for the displayed geometry axis must be determined by

means of the machine data array 20060 AXCONF_GEOAX_NAME_TAB. The channel axis number

is stored with the same index in the MD array 20050 AXCONF_GEOAX_ASSIGN_TAB. The channel

axis number minus 1 provides the channel axis index under which the machine axis number is found

in the MD array 20070 AXCONF_MACHAX_USED.

Program Con-

tinuation:

Switch control OFF - ON.

4210 Channel %1 spindle %2 declaration as rotary axis missing

Parameters: %1 = channel number

%2 = axis name, spindle number

Definitions: If a machine axis is to be operated as a spindle, this machine axis must be declared as a rotary axis.

Reaction: NC not ready.

Mode group not ready, also effective for single axes

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Please inform the authorized personnel/service department.

Set rotary axis declaration for this machine axis in the axis-specific MD 30300 IS_ROT_AX.

Program Con-

tinuation:

Switch control OFF - ON.

4215 Channel %1 spindle %2 declaration as modulo axis missing

Parameters: %1 = channel number

%2 = axis name, spindle number

Definitions: The spindle functionality requires a modulo axis (positions in [deg]).

Reaction: Mode group not ready.

Channel not ready.

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Please inform the authorized personnel/service department.

Set MD 30310 ROT_IS_MODULO.

Program Con-

tinuation:

Switch control OFF - ON.

4220 Channel %1 spindle %2 declared repeatedly

Parameters: %1 = channel number

%2 = axis name, spindle number

Definitions: The spindle number exists more than once in the channel.

Reaction: NC not ready.

Mode group not ready, also effective for single axes

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Please inform the authorized personnel/service department.

The spindle number is stored in the axis-specific MD array 35000 SPIND_ASSIGN_TO_MACHAX.

The channel to which this machine axis/

spindle is assigned is listed in the machine axis index. (The machine axis number is given in the MD

array 20070 AXCONF_MACHAX_USED).

Program Con-

tinuation:

Switch control OFF - ON.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 391 392

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens SINUMERIK 802D sl Spezifikationen Seite 29

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl