Siemens SINUMERIK 802D sl Spezifikationen PDF herunterladen (Seite 89)

NCK alarms/ISO alarms

06/2007 Overview of alarms

2-89

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

Remedy: Press the NC Stop key and select the function "Correction block" with the softkey PROGRAM COR-

RECT. The correction pointer positions on the incorrect block.

Check the block structure and correct in accordance with the programming requirements.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12120 Channel %1 block %2 G function not separately programmed

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The G function programmed in this block must be alone in the block. No general addresses or syn-

chronous actions may occur in the same block. These G functions are:

G25, G26Working area, spindle speed limitation

G110, G111, G112 Pole programming with polar coordinates

Example:

G4 F1000 M100: no M function allowed in the G4 block.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Program G function by itself in the block.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12140 Channel %1 block %2 functionality %3 not implemented

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Software construction in the source text

Definitions: In the full configuration of the control functions are possible that are not yet implemented in the current

version.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Press the NC Stop key and select the function "Correction block" with the softkey PROGRAM COR-

RECT. The correction pointer positions on the incorrect block.

The displayed function must be removed from the program.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12150 Channel %1 block %2 operation %3 not compatible with data type

Parameters: %1 = Channel number

%2 = Block number, label

%3 = String (violating operator)

Definitions: The data types are not compatible with the required operation (within an arithmetic expression or in a

value assignment).

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Press the NC Stop key and select the function "Correction block" with the softkey PROGRAM COR-

RECT. The correction pointer positions on the incorrect block.

Change the definition of the used variables so that the required operations can be performed.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12160 Channel %1 block %2 range of values exceeded

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The programmed constant or the variable exceeds the value range that has previously been estab-

lished by the definition of data type.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 391 392

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens SINUMERIK 802D sl Spezifikationen Seite 89

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl