Siemens SINUMERIK 802D sl Spezifikationen PDF herunterladen (Seite 325)

Cycle alarms

06/2007 Overview of alarms

2-325

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

Definitions: The alarm is triggered by the following cycles: CYCLE105

Max. number of characters per line _PROTFORM[1] has been adjusted.

Reaction: Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62312 Channel %1 block %2: probe is not perpendicular to plane!

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions:

Reaction: Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62500 Channel %1 block %2: GWPS has been limited

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE446

Remedy: Check the limit value for GWPS and program a lower value in the NC program if necessary

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62501 Channel %1 block %2: Speed has been limited

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE446

Remedy: Check speed and program a lower value in the NC program if necessary

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62502 Channel %1 block %2: Dresser %4, GWPS has been limited

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE421

Remedy: Check limit value for GWPS and program a lower value in the NC program if necessary

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62503 Channel %1 block %2: Dresser %4, speed has been limited

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE421

Remedy: Check speed and program a lower value in the NC program if necessary

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62900 Channel %1 block %2: Incorrect source file

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions:

Reaction: Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

1 2 ... 320 321 322 323 324 325 326 327 328 329 330 ... 391 392

Siemens SINUMERIK 802D sl Spezifikationen Seite 325

Kommentare zu diesen Handbüchern

Siemens SINUMERIK 802D sl Spezifikationen Seite 325

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl