Siemens SINUMERIK 802D sl Spezifikationen PDF herunterladen (Seite 80)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-80

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

10860 Channel %1 block %2 feedrate not programmed

Parameters: %1 = channel number

%2 = block number, label

Definitions: In the displayed block, an interpolation type other than G00 (rapid traverse) is active. The F value has

not been programmed.

Reaction: Correction block is reorganized.

Local alarm reaction.

Interface signals are set.

Alarm display.

Remedy: Program feedrate in accordance with the interpolation type.

G93: The feedrate is specified as a time-reciprocal value under address F in [1/min].

G94 and G97: The feedrate is programmed under address F in [mm/min] or [m/min].

G95: The feedrate is programmed as revolutional feedrate under address F in [mm/revolution].

G96: The feedrate is programmed as cutting rate under address S in [m/min]. It is derived from the

current spindle speed.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

10861 Channel %1 block %3 velocity of positioning axis %2 is zero

Parameters: %1 = channel number

%2 = axis

%3 = block number, label

Definitions: No axis velocity has been programmed and the positioning velocity set in the machine data is zero.

Reaction: Correction block is reorganized.

Local alarm reaction.

Interface signals are set.

Alarm display.

Remedy: Please inform the authorized personnel/service department. Enter a different velocity in machine data

32060 MA_POS_AX_VELO.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

10862 Channel %1 block %2 master spindle also used as path axis

Parameters: %1 = channel number

%2 = block number, label

Definitions: A contour has been programmed that also includes the master spindle as contouring axis.

However, the velocity of the contour is derived from the rotational speed of the master spindle (e.g.

G95).

Reaction: Correction block is reorganized.

Local alarm reaction.

Interface signals are set.

Alarm display.

Remedy: Change the program so it cannot reference itself.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

10870 Channel %1 block %2 facing axis for constant velocity not defined

Parameters: %1 = channel number

%2 = block number, label

Definitions: When constant cutting speed is activated via the G96 function, the spindle speed is controlled through

the position of the facing axis such that the cutting speed programmed under S [mm/min] is applied at

the tool tip.

In MD 20100 DIAMETER_AX_DEF[n,m]=x (n ... channel index, m ... spindle index, x ... axis name),

the name of the face axis [String] can be specified for each of the 5 spindles and it is used for speed

calculation.

S [1/min] = "+++OLE"

Reaction: Correction block is reorganized.

Local alarm reaction.

Interface signals are set.

Alarm display.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 391 392

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens SINUMERIK 802D sl Spezifikationen Seite 80

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl