Siemens SINUMERIK 802D sl Spezifikationen PDF herunterladen (Seite 27)

NCK alarms/ISO alarms

06/2007 Overview of alarms

2-27

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

4160 Channel %1 invalid M function number configured for spindle switchover

Parameters:

Definitions: %1=Channel number

An M function was specified in MD 20094 SPIND_RIGID_TAPPING_M_NR to configure the M func-

tion number for spindle switchover to axis mode. The M function number is assigned by the system

and cannot be used for the switchover (M1 to M5,M17, M30, M40 to M45).

Reaction: Mode group not ready.

Channel not ready.

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Configure an M function which is not used by the system (M1 to M5, M17, M30, M40 to M45) in MD

20094 SPIND_RIGID_TAPPING_M_NR.

Program Con-

tinuation:

Switch control OFF - ON.

4181 Channel %1 invalid assignment of an M auxiliary function number

Parameters: %1 = channel number

Definitions: In machine data 22254 AUXFU_ASSOC_M0_VALUE or 22256 AUXFU_ASSOC_M1_VALUE, a

number has been specified for the configuration of a new predefined M function which is occupied by

the system, and cannot be used for an assignment. (M0 to M5, M17, M30, M40 to M45).

Reaction: Mode group not ready.

Channel not ready.

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Configure an M function in machine data 22254 AUXFU_ASSOC_M0_VALUE or 22256

AUXFU_ASSOC_M1_VALUE which is not occupied by the system (M1 to M5, M17, M30, M40 to

M45).

Program Con-

tinuation:

Switch control OFF - ON.

4182 Channel %1 invalid M auxiliary function number in %2%3, MD reset

Parameters: %1 = channel number

%2 = machine data identifier

%3 = if necessary, MD index

Definitions: In the specified machine data, a number has been specified for the configuration of an M function

which is occupied by the system, and cannot be used for an assignment.

(M0 to M5, M17, M30, M40 to M45 and also M98, M99 with applied ISO dialect).

The value set by the user has been reset to the default value by the system.

Reaction: Mode group not ready.

Channel not ready.

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Configure an M function in the specified machine data which is not occupied by the system (M0 to M5,

M17, M30, M40 to M45 and also M98, M99 with applied ISO dialect).

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

4183 Channel %1 M auxiliary function number %2 used several times (%3 and

%4)

Parameters: %1 = channel number.

%2 = M auxiliary function number.

%3 = machine data identifier.

%4 = machine data identifier.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 391 392

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens SINUMERIK 802D sl Spezifikationen Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl