Siemens SINUMERIK 802D sl Betreibershandbuch PDF herunterladen (Seite 133)

NCK alarms

06/2009 Overview of alarms

2-133

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Definitions: A position beyond the range of 0 - 359.999 has been programmed for a modulo axis.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Program position in the range 0 - 359.999.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

16903 [Channel %1: ] Program control: action %2<ALNX> not allowed in the

current state

Parameters: %1 = Channel number

%2 = Action number/action name

Definitions: The relevant action cannot be processed now. This can occur, for instance, during read-in of machine

data.

Reaction: Alarm display.

Remedy: Wait until the procedure is terminated or abort with Reset and repeat the operation.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

16904 [Channel %1: ] Program control: action %2<ALNX> not allowed in the

current state

Parameters: %1 = Channel number

%2 = Action number/action name

Definitions: The operation (program, JOG, block search, reference point, etc.) cannot be started or continued in

the current status.

Reaction: Alarm display.

Remedy: Check the program status and channel status.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

16905 [Channel %1: ] Program control: action %2<ALNX> not allowed

Parameters: %1 = Channel number

%2 = Action number/action name

Definitions: Operation cannot be started or continued. A start is only accepted when an NCK function can be

started.

Example: A start is accepted in JOG mode when, for example, the function generator is active or a

JOG movement has first been stopped with the Stop key.

Reaction: Alarm reaction in Automatic mode.

Remedy: Check the program status and channel status.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

16906 [Channel %1: ] Program control: action %2<ALNX> is aborted due to an

alarm

Parameters: %1 = Channel number

%2 = Action number/action name

Definitions: The action was aborted due to an alarm.

Reaction: Alarm display.

Remedy: Eliminate the error and acknowledge the alarm. Then repeat the operation.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

16907 [Channel %1: ] Action %2<ALNX> only possible in stop state

Parameters: %1 = Channel number

%2 = Action number/action name

Definitions: This action may only be performed in Stop state.

Reaction: Alarm display.

Remedy: Check the program status and channel status.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 339 340

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens SINUMERIK 802D sl Betreibershandbuch Seite 133

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl