Siemens SINUMERIK 802D sl Betreibershandbuch PDF herunterladen (Seite 247)

Cycle alarms

06/2009 Overview of alarms

2-247

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61511 [Channel %1: ] Block %2: Incorrect shoulder position or tool edge D1/D2

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: setup function

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61512 [Channel %1: ] Block %2: Incorrect longitudinal position

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: setup function

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61513 [Channel %1: ] Block %2: Dresser left and inclined grinding wheel

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: setup function

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61514 [Channel %1: ] Block %2: Grinding wheel type missing

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: setup function

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61515 [Channel %1: ] Block %2: Retraction path <= dressing amount

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE416

Remedy: Change retraction path

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61517 [Channel %1: ] Block %2: Angle of inclined grinding wheel missing

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE416

Remedy: Enter angle under $TC_TPG8

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61518 [Channel %1: ] Block %2: Shoulder height of grinding wheel must be >

grinding wheel radius

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE432

Remedy: Change shoulder height or grinding wheel radius

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 339 340

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens SINUMERIK 802D sl Betreibershandbuch Seite 247

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl