Siemens SINUMERIK 802D sl Betreibershandbuch PDF herunterladen (Seite 31)

NCK alarms

06/2009 Overview of alarms

2-31

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Remedy: Redefine the NC memory structure!

A specific MD for NC user memory allocation cannot be stated to be the cause of the alarm. The MD

initiating the alarm therefore has to be determined on the basis of the default values in the machine

data by changing the user-specific memory structure step by step.

Usually, it is not just one single MD that has been set too large. Therefore it is advisable to reduce the

memory area by a certain proportion in several MDs.

Program Con-

tinuation:

Clear alarm with the RESET key in all channels of this mode group. Restart part program.

6010 [Channel %1: ] Data block %2 not or not completely created, error code

Parameters: %1 = Channel number

%2 = String (block name)

%3 = Internal error code

Definitions: Data management has detected an error in power-up. The specified data block may not have been

created. The error number specifies the type of error. If the error number is >100000, then there is a

fatal system error. Otherwise, the user memory range was made too small. In this case the (user) error

codes have the following meaning:

- Error number 1: No memory space available

- Error number 2: Maximum possible number of symbols exceeded

- Error number 3: Index 1 lies outside the valid value range

- Error number 4: Name already exists in channel

- Error number 5: Name already exists in NCK

If the alarm occurs after cycle programs, macro definitions or definitions for global user data (GUD)

have been introduced, the machine data for the user memory configuration have been incorrectly con-

figured. In all other cases, changes to machine data that are already correct lead to errors in the user

memory configuration.

The following block names (2nd parameter) are known in the NCK (all system and user data blocks;

in general, only problems in the user data blocks can be remedied by user intervention):

- _N_NC_OPT - System internal: option data, NCK global

- _N_NC_SEA - System internal: setting data, NCK global

- _N_NC_TEA - System internal: machine data, NCK global

- _N_NC_CEC - System internal: 'cross error compensation'

- _N_NC_PRO - System internal: protection zones, NCK global

- _N_NC_GD1 - User: 1st GUD block defined by _N_SGUD_DEF, NCK global

- _N_NC_GD2 - User: 2nd GUD block defined by _N_MGUD_DEF, NCK global

- _N_NC_GD3 - User: 3rd GUD block defined by _N_UGUD_DEF, NCK global

- _N_NC_GD4 - User: 4th GUD block defined by _N_GUD4_DEF, NCK global

- _N_NC_GD5 - User: 5th GUD block defined by _N_GUD5_DEF, NCK global

- _N_NC_GD6 - User: 6th GUD block defined by _N_GUD6_DEF, NCK global

- _N_NC_GD7 - User: 7th GUD block defined by _N_GUD7_DEF, NCK global

- _N_NC_GD8 - User: 8th GUD block defined by _N_GUD8_DEF, NCK global

- _N_NC_GD9 - User: 9th GUD block defined by _N_GUD9_DEF, NCK global

- _N_NC_MAC - User: Macro definitions

- _N_NC_FUN - System internal: predefined functions and procedures, NCK global

- _N_CHc_OPT - System internal: option data, channel-specific

- _N_CHc_SEA - System internal: setting data, channel-specific

- _N_CHc_TEA - System internal: machine data, channel-specific

- _N_CHc_PRO - System internal: protection zones, channel-specific

- _N_CHc_UFR - System internal: frames, channel-specific

- _N_CHc_RPA - System internal: arithmetic parameters, channel-specific

- _N_CHc_GD1 - User: 1st GUD block defined by _N_SGUD_DEF, channel-specific

- _N_CHc_GD2 - User: 2nd GUD block defined by _N_MGUD_DEF, channel-specific

- _N_CHc_GD3 - User: 3rd GUD block defined by _N_UGUD_DEF, channel-specific

- _N_CHc_GD4 - User: 4th GUD block defined by _N_GUD4_DEF, channel-specific

- _N_CHc_GD5 - User: 5th GUD block defined by _N_GUD5_DEF, channel-specific

- _N_CHc_GD6 - User: 6th GUD block defined by _N_GUD6_DEF, channel-specific

- _N_CHc_GD7 - User: 7th GUD block defined by _N_GUD7_DEF, channel-specific

- _N_CHc_GD8 - User: 8th GUD block defined by _N_GUD8_DEF, channel-specific

- _N_CHc_GD9 - User: 9th GUD block defined by _N_GUD9_DEF, channel-specific

- _N_AXa_OPT - System internal: option data, axial

- _N_AXa_SEA - System internal: setting data, axial

- _N_AXa_TEA - System internal: machine data, axial

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 339 340

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens SINUMERIK 802D sl Betreibershandbuch Seite 31

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl