Siemens SINUMERIK 802D sl Betreibershandbuch PDF herunterladen (Seite 5)

06/2009 Preface

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Questions about this documentation

If you have any queries (suggestions, corrections) in relation to this documenta-

tion, please send a fax or email to the following address

A fax form is available at the end of this document.

SINUMERIK Internet address

http://www.siemens.com/sinumerik

CompactFlash cards for the user

• The SINUMERIK CNC supports the file systems FAT16 and FAT32 for Com-

pactFlash cards. You may need to format the memory card if you want to use

a memory card from another device or if you want to ensure the compatibility

of the memory card with the SINUMERIK. However, formatting the memory

card will permanently delete all data on it.

• Do not remove the memory card while it is being accessed. This can result in

damage to the memory card and the SINUMERIK as well as the data on the

memory card.

• If you cannot use a memory card with the SINUMERIK, it is probably because

the memory card is not formatted for the control system (e.g. Ext3 Linux file

system), the memory card file system is faulty or it is the wrong type of memory

card.

• Insert the memory card carefully and the right way round into the memory card

slot (observe indicators such as arrow or similar). This way you avoid mechan-

ical damage to the memory card or the device.

• Only use memory cards that have been approved by Siemens for use with

SINUMERIK. Even though the SINUMERIK complies with the general industry

standards for memory cards, it is possible that memory cards from some man-

ufacturers will not function perfectly in this device or are not completely com-

patible with it (you can obtain information on compatibility from the memory

card manufacturer or supplier).

• The "CompactFlash® 5000 Industrial Grade" CompactFlash card from SanD-

isk has been approved for SINUMERIK (Order Number 6FC5313-5AG00-

0AA0).

Note

Country-specific telephone numbers for technical support are provided under the

following Internet address:

http://www.automation.siemens.com/partner

Fax

+49 9131 98 2176

mailto:docu.motionc[email protected]

1 2 3 4 5 6 7 8 9 10 ... 339 340

Keine Kommentare

Siemens SINUMERIK 802D sl Betreibershandbuch Seite 5