Siemens SINUMERIK 802D sl Betreibershandbuch PDF herunterladen (Seite 244)

Overview of alarms 06/2009

Cycle alarms

2-244

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

61427 [Channel %1: ] Block %2: Tool data of the active workpiece probe

incorrect or inactive --> Error code: %4

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following measuring cycles: CYCLE996

Remedy: Causes of error:

1. Error code = A -> Workpiece probe (or tool edge) inactive

2. Error code = B -> Length L1 of the workpiece probe = 0

61428 [Channel %1: ] Block %2: Error while creating log file -> Error code: %4

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following measuring cycles: CYCLE996

Remedy: Causes of error:

1. Error code = A -> Number of log files in the current directory > 99

2. Error code = B -> Log files too long. Rename or delete log files,

check MD11420 $MN_LEN_PROTOCOL_FILE.

61429 [Channel %1: ] Block %2: Measuring axis (rotary axis 1 or 2) not in basic

or intended position -> Error code: %4

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following measuring cycles: CYCLE996

Remedy: Causes of error:

1. Error code = A -> Rotary axis 1 not in basic position on 1st measurement

2. Error code = B -> Rotary axis 2 not in basic position on 1st measurement

3. Error code = C -> Rotary axis 2 not in intended position on 2nd or 3rd measurement in compar-

ison to 1st measurement, see parameters _OVR[63 to 65]

4. Error code = D -> Rotary axis 1 not in intended position on 2nd or 3rd measurement in compar-

ison to 1st measurement, see parameters _OVR[60 to 62]

61430 [Channel %1: ] Block %2: Kinematic vectors not computed -> Error code:

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following measuring cycles: CYCLE996

Remedy: Causes of error:

1. Error code = A -> Plausibility of the input points PM1, PM2, PM3 not fulfilled, resulting side

lengths must be not equal to zero

(Notice: even in the case of side lengths not equal to zero, there is a risk

of not being able to form a triangle => check PM1...3.)

2. Error code = B -> Enclosed angle at PM1 between the spread vectors PM1PM2 and PM1PM3

is equal to zero 0.

Starting points do not form a triangle.

3. Error code = C -> Enclosed angle at PM2 between the spread vectors PM2PM1 and PM2PM3

is equal to 0.

Starting points do not form a triangle.

4. Error code = D -> Enclosed angle at PM3 between the spread vectors PM3PM1 and PM3PM2

is equal to 0.

Starting points do not form a triangle.

5. Error code = E -> Normalizing interpolation point: Invalid axis name defined for computation

6. Error code = F -> Normalizing vertice: Invalid plane defined for computation

61440 [Channel %1: ] Block %2: Position of cutting edge cannot be determined

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following measuring cycle: CYCLE982

Remedy: A turning tool with a cutting edge position between 1 and 8 must be used as the tool type.

Check the entered cutting edge position with reference to the basic position of the tool carrier.

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 339 340

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens SINUMERIK 802D sl Betreibershandbuch Seite 244

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl