Siemens SINUMERIK 802D sl Betreibershandbuch PDF herunterladen (Seite 62)

Overview of alarms 06/2009

NCK alarms

2-62

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

10880 [Channel %1: ] Block %2 too many empty blocks between two traversing

blocks when inserting chamfers or radii

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Between 2 blocks containing contour elements and which are to be joined with a chamfer or a radius

(CHF, RND), more blocks without contour information have been programmed than provided for in the

MD20200 $MC_CHFRND_MAXNUM_DUMMY_BLOCKS.

Reaction: Correction block is reorganized.

Local alarm reaction.

Interface signals are set.

Alarm display.

Remedy: Please inform the authorized personnel/service department. Modify the part program in order that the

permissible number of dummy blocks is not exceeded or adapt the channel-specific machine data

MD20200 $MC_CHFRND_MAXNUM_DUMMY_BLOCKS (dummy blocks with chamfers/radii) to the

maximum number of dummy blocks.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

10881 [Channel %1: ] Block %2 overflow of local block buffer in the case of

chamfers or radii

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Between 2 blocks containing the contour elements and to be joined with a chamfer or a radius (CHF,

RND), so many dummy blocks have been programmed without contour information that the internal

buffer is too small.

Reaction: Correction block is reorganized.

Local alarm reaction.

Interface signals are set.

Alarm display.

Remedy: Modify part program such that the number of dummy blocks is reduced.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

10882 [Channel %1: ] Block %2 activation of chamfers or radii (non-modal)

without traversing movement in the block

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: No chamfer or radius has been inserted between 2 linear or circle contours (edge breaking) because:

There is no straight line or circle contour in the plane

There is a movement outside the plane

A plane change has taken place

The permissible number of empty blocks without traversing information (dummy blocks) has been

exceeded.

Reaction: Correction block is reorganized.

Local alarm reaction.

Interface signals are set.

Alarm display.

Remedy: Please inform the authorized personnel/service department. Correct the part program according to the

above error description or change the number of dummy blocks in the channel-specific MD20200

$MC_CHFRND_MAXNUM_DUMMY_BLOCKS to comply with the maximum number allowed for in

the program.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

10883 [Channel %1: ] Block %2 chamfer or fillet has to be reduced

Parameters: %1 = Channel number

%2 = Block number, label

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 339 340

Siemens SINUMERIK 802D sl Betreibershandbuch Seite 62

Kommentare zu diesen Handbüchern

Siemens SINUMERIK 802D sl Betreibershandbuch Seite 62

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl